Holds the bag up, but lousy for spinning.
OK, I'm new to this, just got this to expand my exercise a bit. So as I'm punching away, the bag has a tedency to spin a bit. No matter how much I tighten it up, even with the lock washer, it spins the bolt right out of the nut.
Don't bother with this, or if you get this, also buy a separate swivel mechanism. I'm taking mine down and replacing it with something that acutally incorporates a swivel of sorts - the only "swivel" this allows is the bottom piece spinning, which puts the torque on the bolt which then spins out of the nut on top.
Great Product! Worth the price!
It's easy and self explanatory.
It does the job, no questions asked.
It evens comes with the 2 bolts [as pictured :)]
Great product
This holder was perfect for my heavy bag. I mounted it to a ceiling joist in my basement. Always drill holes 1/8" smaller than what you think you need, and the screws will fit tightly. Use a socket wrench to crank the bolts in well.
It works, could be better.
Everlast Heavy Bag Hanger works fine, but the horizontal bolt's threads will rub on your bag's hook. Can be a little noisy.
Simple, Classic, Quality
Everlast Heavy Bag Hanger is acceptable.
This is much easier to install if you have a good socket wrench.
The directions are written in extremely small type, and it is difficult to make out the diagrams. However, this is not a problem because, unless you are mechanically challenged, the item is self-explanatory. It is much easier to install the lag bolts into a wood rafter if you drill some small pilot holes first. A small hole will not reduce the holding power of the screw. The directions do not tell you this. They could be improved if Everlast were to tell you that this is an option, and instruct you what diameter hole was appropriate.
The nuts, bolts, and lock-washers are standard items that have been used without ... Read More
